Difference between revisions of "Flush-Form CoreXY Design"

From Double Jump Electric Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
The original [http://corexy.com/ CoreXY] platform was a reimagined belt pattern for XY gantries that could travel at higher speeds than their typical cartesian cousins. By mounting both motors on the frame in an "Etch-a-Sketch"-like fashion, the design reduces the moving mass by one motor while still enabling translation in an XY plane.
 
The original [http://corexy.com/ CoreXY] platform was a reimagined belt pattern for XY gantries that could travel at higher speeds than their typical cartesian cousins. By mounting both motors on the frame in an "Etch-a-Sketch"-like fashion, the design reduces the moving mass by one motor while still enabling translation in an XY plane.
  
Over the years, the CoreXY has seen [https://reprap.org/forum/thumbcache/e01/f7a/f1a/784/71f/09e/5f7/aef/231/b82/99_800x400.png many], [https://reprap.org/forum/thumbcache/96d/78e/209/583/a8f/0ab/b0d/76f/193/ff3/d0_800x400.png many] belt pattern tweaks, most of which offer minor conveniences, some of which even have their own names, like the [https://forum.duet3d.com/assets/uploads/files/1547482422229-full-assembly-belt-path.jpg Fabtotum-style] belt pattern.
+
Over the years, the CoreXY has seen [https://reprap.org/forum/thumbcache/e01/f7a/f1a/784/71f/09e/5f7/aef/231/b82/99_800x400.png many], [https://reprap.org/forum/thumbcache/96d/78e/209/583/a8f/0ab/b0d/76f/193/ff3/d0_800x400.png many] belt pattern tweaks, most of which offer minor conveniences. Some of these variants even have their own names, like the [https://forum.duet3d.com/assets/uploads/files/1547482422229-full-assembly-belt-path.jpg Fabtotum-style] belt pattern.
  
 
I'd like to add one more CoreXY variant to the mix, which I'm calling the 'Flush-Form CoreXY'.
 
I'd like to add one more CoreXY variant to the mix, which I'm calling the 'Flush-Form CoreXY'.
Line 7: Line 7:
 
This stylize pattern actually creates a few conveniences. First, it makes the belts easier to assemble as the two patterns closely mirror each other. If this is your first CoreXY build, stringing the belts can be somewhat confusing--especially if you're not the designer. Second, by stacking the belts that meet at the carriage on the same plate, it eliminates any torisional loads placed on the carriage that would cause an overconstrained carriage to wiggle back-and-forth each time it changed direction. Next, it exposes easy belt tensioning. By mounting both motors into slots adjusting tension is done with a side-mounted set screw. Finally, I'll admit that, aesthetically, it's quite pleasing to the eye.
 
This stylize pattern actually creates a few conveniences. First, it makes the belts easier to assemble as the two patterns closely mirror each other. If this is your first CoreXY build, stringing the belts can be somewhat confusing--especially if you're not the designer. Second, by stacking the belts that meet at the carriage on the same plate, it eliminates any torisional loads placed on the carriage that would cause an overconstrained carriage to wiggle back-and-forth each time it changed direction. Next, it exposes easy belt tensioning. By mounting both motors into slots adjusting tension is done with a side-mounted set screw. Finally, I'll admit that, aesthetically, it's quite pleasing to the eye.
 
[[File:70544847 10158912446343102 7990227818833248256 n.jpg|480px|center]]
 
[[File:70544847 10158912446343102 7990227818833248256 n.jpg|480px|center]]
 +
 +
==Belt Installation==
 +
TODO: write this
 +
 +
==Belt Tensioning==
 +
TODO: discuss Carbon Drive App

Latest revision as of 21:11, 27 September 2019

The original CoreXY platform was a reimagined belt pattern for XY gantries that could travel at higher speeds than their typical cartesian cousins. By mounting both motors on the frame in an "Etch-a-Sketch"-like fashion, the design reduces the moving mass by one motor while still enabling translation in an XY plane.

Over the years, the CoreXY has seen many, many belt pattern tweaks, most of which offer minor conveniences. Some of these variants even have their own names, like the Fabtotum-style belt pattern.

I'd like to add one more CoreXY variant to the mix, which I'm calling the 'Flush-Form CoreXY'.

Flush-form CoreXY.png

This stylize pattern actually creates a few conveniences. First, it makes the belts easier to assemble as the two patterns closely mirror each other. If this is your first CoreXY build, stringing the belts can be somewhat confusing--especially if you're not the designer. Second, by stacking the belts that meet at the carriage on the same plate, it eliminates any torisional loads placed on the carriage that would cause an overconstrained carriage to wiggle back-and-forth each time it changed direction. Next, it exposes easy belt tensioning. By mounting both motors into slots adjusting tension is done with a side-mounted set screw. Finally, I'll admit that, aesthetically, it's quite pleasing to the eye.

70544847 10158912446343102 7990227818833248256 n.jpg

Belt Installation

TODO: write this

Belt Tensioning

TODO: discuss Carbon Drive App