Internet Sharing with a Raspberry Pi
Open a text editor and save the contents below as ipmasq.sh.
#Clears if any old iptable rules/ policies are there. iptables --flush -t nat # Now we will do Masquerading ie. we are doing NAT. iptables --table nat --append POSTROUTING --out-interface wlan0 -j MASQUERADE iptables --append FORWARD --in-interface eth0 -j ACCEPT # Enabling packet forwarding. echo 1 > /proc/sys/net/ipv4/ip_forward
Note that the script above assumes that you are sharing the eth0 connection from wlan0. This may not be the case for your computer. (Mine was enx.. and wlp59s0. Check with the ifconfig command.
From the terminal, make the file executable with:
To share the internet connection, run the file with