Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 2: | Line 2: | ||
{| class="wikitable" | {| class="wikitable" | ||
− | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description | + | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || External Walls First? || Description |
|- | |- | ||
− | | | + | | Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 2 || 80 ||100 || Yes || Functional |
+ | | Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 2 || 60 ||100 || Yes || Functional | ||
|} | |} |
Revision as of 17:32, 26 May 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | Perimeters | Ext Perimeter Speed | Default Speed | External Walls First? | Description | ||||||||||
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 2 | 80 | 100 | Yes | Functional | Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 2 | 60 | 100 | Yes | Functional |