Difference between revisions of "Jubilee 3D Printer Filament Settings"

From Double Jump Electric Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
{| class="wikitable"
 
{| class="wikitable"
| Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Ext Walls First? || Description
+
| Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Ext Walls First? || Retraction Amount || Retract Speed mm/s || Description
 
|-
 
|-
| Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 6 || 80 || 100 || Yes || Functional
+
| Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 6 || 80 || 100 || Yes || 0.2 || 133 || Functional
 
|-
 
|-
| Proto Pasta|| HTPLA || Matte Orange || 0.2 || 220 || 6 || 60 || 100 || Yes || Functional
+
| Proto Pasta|| HTPLA || Matte Orange || 0.2 || 220 || 6 || 60 || 100 || Yes || ?? || ?? || Functional
 
|}
 
|}

Revision as of 20:33, 27 May 2020

The following is an in-progress list of settings for filaments as run through specific Jubilee heads

Brand Material Color Layer Height Temperature Perimeters Ext Perimeter Speed Default Speed Ext Walls First? Retraction Amount Retract Speed mm/s Description
Polymkaer Polylite PLA Orange 0.2 200 6 80 100 Yes 0.2 133 Functional
Proto Pasta HTPLA Matte Orange 0.2 220 6 60 100 Yes ?? ?? Functional