Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 2: | Line 2: | ||
{| class="wikitable" | {| class="wikitable" | ||
− | | Brand || Material || Color || Layer Height || Temperature || First Layer Temp || Perimeters || Ext Perimeter Speed || Default Speed || Ext Walls First? || Hotend || Nozzle || | + | | Brand || Material || Color || Layer Height || Temperature || First Layer Temp || Perimeters || Ext Perimeter Speed || Default Speed || Ext Walls First? || Hotend || Nozzle || Retract Length || Retract Speed mm/s || Description |
|- | |- | ||
| Polymkaer || Polylite PLA || Orange || 0.2 || 200 || 200 || 6 || 80 || 100 || Yes || Volcano || 0.4 || 0.2 || 133 || Functional | | Polymkaer || Polylite PLA || Orange || 0.2 || 200 || 200 || 6 || 80 || 100 || Yes || Volcano || 0.4 || 0.2 || 133 || Functional |
Revision as of 10:42, 18 June 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | First Layer Temp | Perimeters | Ext Perimeter Speed | Default Speed | Ext Walls First? | Hotend | Nozzle | Retract Length | Retract Speed mm/s | Description |
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 200 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional |
Prusa | Prusament PLA | Galaxy Black | 0.2 | 200 | 220 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional |
Proto Pasta | HTPLA | Matte Orange | 0.2 | 220 | 200 | 6 | 60 | 100 | Yes | Volcano | 0.4 | ?? | ?? | Functional |
Prusament Galaxy Black PLA Notes
Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200)