Difference between revisions of "Jubilee 3D Printer Filament Settings"

From Double Jump Electric Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
{| class="wikitable"
 
{| class="wikitable"
| Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description
+
| Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || External Walls First? || Description
 
|-
 
|-
| Hatchbox || PLA || Opaque White || 0.2 || 195 || 2 || 60 ||100 || Detail
+
| Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 2 || 80 ||100 || Yes || Functional
 +
| Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 2 || 60 ||100 || Yes || Functional
 
|}
 
|}

Revision as of 17:32, 26 May 2020

The following is an in-progress list of settings for filaments as run through specific Jubilee heads

Brand Material Color Layer Height Temperature Perimeters Ext Perimeter Speed Default Speed External Walls First? Description
Polymkaer Polylite PLA Orange 0.2 200 2 80 100 Yes Functional Polymkaer Polylite PLA Orange 0.2 200 2 60 100 Yes Functional