Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) (Created page with "The following is an in-progress list of settings for filaments as run through specific Jubilee heads {| class="wikitable" | Brand || Material || Color || Temperature || Perim...") |
Poofjunior (talk | contribs) |
||
| Line 2: | Line 2: | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | | Brand || Material || Color || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description | + | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description |
|- | |- | ||
| − | | Proto Pasta || HTPLA || Opaque White | + | | Proto Pasta || HTPLA || Opaque White || 0.2 || 195 || 2 || 60 ||100 || Detail |
|} | |} | ||
Revision as of 19:09, 17 May 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
| Brand | Material | Color | Layer Height | Temperature | Perimeters | Ext Perimeter Speed | Default Speed | Description |
| Proto Pasta | HTPLA | Opaque White | 0.2 | 195 | 2 | 60 | 100 | Detail |
