Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 4: | Line 4: | ||
| Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Description | ||
|- | |- | ||
− | | | + | | Hatchbox || PLA || Opaque White || 0.2 || 195 || 2 || 60 ||100 || Detail |
|} | |} |
Revision as of 20:13, 17 May 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | Perimeters | Ext Perimeter Speed | Default Speed | Description |
Hatchbox | PLA | Opaque White | 0.2 | 195 | 2 | 60 | 100 | Detail |