View source for Setup Raspberry Pi with Static IP Address

Flash the Raspberry Pi with [https://www.balena.io/etcher/ etcher].

On the SD Card in the root directory of the boot partition, create an empty file called **ssh** or **ssh.txt**

On the SD Card in the etc directory of the rootfs boot partition, open the dhcpcd.conf file with root permissions.

Add the following lines to the bottom of the file. (This example assumes your ip address is 192.168.1.2, and your gateway is 192.168.1.3.)

<code>
interface eth0
static ip_address=192.168.1.2/24
static routers=192.168.1.3
</code>

Log into the Pi via SSH and expand the filesystem with: <code>raspi-config --expand-rootfs </code>


== Resources ==
# [https://www.raspberrypi.org/forums/viewtopic.php?t=144839#p1462633 Enabling SSH]
# [https://pimylifeup.com/raspberry-pi-static-ip-address/ Configuring the Pi SD Card with a Static IP]
# [https://www.raspberrypi.org/forums/viewtopic.php?t=195836#p1225554 Expanding the File System]