Setup Raspberry Pi with Static IP Address
Flash the Raspberry Pi with etcher.
On the SD Card in the root directory of the boot partition, create an empty file called **ssh** or **ssh.txt**
On the SD Card in the etc directory of the rootfs boot partition, open the dhcpcd.conf file with root permissions.
Add the following lines to the bottom of the file. (This example assumes your ip address is 192.168.1.2, and your gateway is 192.168.1.3.)
interface eth0 static ip_address=192.168.1.2/24 static routers=192.168.1.3
Log into the Pi via SSH and expand the filesystem with:
Once you can log into the Pi remotely via SSH, see the notes on internet sharing so that you can update the Pi with the latest packages.