Jubilee 3D Printer Filament Settings
Jump to navigation
Jump to search
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | First Layer Temp | Perimeters | Ext Perimeter Speed | Default Speed | Ext Walls First? | Hotend | Nozzle | Retract Length | Retract Speed mm/s | Description |
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 200 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional |
Prusa | Prusament PLA | Galaxy Black | 0.2 | 200 | 220 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional |
Proto Pasta | HTPLA | Matte Orange | 0.2 | 220 | 200 | 6 | 60 | 100 | Yes | Volcano | 0.4 | ?? | ?? | Functional |
Keene Villiage Plastics | HTPLA | Silver | 0.2 | 210 | 220 | 6 | 60 | 100 | Yes | Copper V6 | 0.5 | 0.5 | 60 | Functional |
Prusament Galaxy Black PLA Notes
Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200)
Overture (Blue) Pla Notes
I need to increase the extrusion rate to 110% (live view) to get consistent extrusion. I also need to slow down to ~80mm/sec