Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 2: | Line 2: | ||
{| class="wikitable" | {| class="wikitable" | ||
− | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || | + | | Brand || Material || Color || Layer Height || Temperature || Perimeters || Ext Perimeter Speed || Default Speed || Ext Walls First? || Description |
|- | |- | ||
− | | Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || | + | | Polymkaer|| Polylite PLA || Orange || 0.2 || 200 || 6 || 80 || 100 || Yes || Functional |
− | | | + | |- |
+ | | Proto Pasta|| HTPLA || Matte Orange || 0.2 || 220 || 6 || 60 || 100 || Yes || Functional | ||
|} | |} |
Revision as of 17:33, 26 May 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | Perimeters | Ext Perimeter Speed | Default Speed | Ext Walls First? | Description |
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 6 | 80 | 100 | Yes | Functional |
Proto Pasta | HTPLA | Matte Orange | 0.2 | 220 | 6 | 60 | 100 | Yes | Functional |