Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 9: | Line 9: | ||
|- | |- | ||
| Proto Pasta|| HTPLA || Matte Orange || 0.2 || 220 || 200 || 6 || 60 || 100 || Yes ||Volcano || 0.4 || ?? || ?? || Functional | | Proto Pasta|| HTPLA || Matte Orange || 0.2 || 220 || 200 || 6 || 60 || 100 || Yes ||Volcano || 0.4 || ?? || ?? || Functional | ||
− | + | |- | |
− | | | + | | Keene Villiage Plastics || HTPLA || Silver || 0.2 || 210 || 220 || 6 || 60 || 100 || Yes || Copper V6 || 0.5 || 0.5 || 60 || Functional |
+ | | | ||
===Prusament Galaxy Black PLA Notes === | ===Prusament Galaxy Black PLA Notes === | ||
Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200) | Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200) |
Revision as of 14:10, 12 December 2021
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | First Layer Temp | Perimeters | Ext Perimeter Speed | Default Speed | Ext Walls First? | Hotend | Nozzle | Retract Length | Retract Speed mm/s | Description | |
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 200 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional | |
Prusa | Prusament PLA | Galaxy Black | 0.2 | 200 | 220 | 6 | 80 | 100 | Yes | Volcano | 0.4 | 0.2 | 133 | Functional | |
Proto Pasta | HTPLA | Matte Orange | 0.2 | 220 | 200 | 6 | 60 | 100 | Yes | Volcano | 0.4 | ?? | ?? | Functional | |
Keene Villiage Plastics | HTPLA | Silver | 0.2 | 210 | 220 | 6 | 60 | 100 | Yes | Copper V6 | 0.5 | 0.5 | 60 | Functional |
Prusament Galaxy Black PLA NotesPrusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200) |