Difference between revisions of "Jubilee 3D Printer Filament Settings"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 11: | Line 11: | ||
|} | |} | ||
+ | |||
+ | |||
+ | ===Prusament Galaxy Black PLA Notes === | ||
+ | Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200) |
Revision as of 10:40, 18 June 2020
The following is an in-progress list of settings for filaments as run through specific Jubilee heads
Brand | Material | Color | Layer Height | Temperature | First Layer Temp | Perimeters | Ext Perimeter Speed | Default Speed | Ext Walls First? | Retraction Amount | Retract Speed mm/s | Description |
Polymkaer | Polylite PLA | Orange | 0.2 | 200 | 200 | 6 | 80 | 100 | Yes | 0.2 | 133 | Functional |
Prusa | Prusament PLA | Galaxy Black | 0.2 | 200 | 220 | 6 | 80 | 100 | Yes | 0.2 | 133 | Functional |
Proto Pasta | HTPLA | Matte Orange | 0.2 | 220 | 200 | 6 | 60 | 100 | Yes | ?? | ?? | Functional |
Prusament Galaxy Black PLA Notes
Prusament PLA sticks to a PEI sheet better at a higher temperature (220, versus 200)