Setup Raspberry Pi with Static IP Address
Revision as of 13:21, 26 April 2021 by Poofjunior (talk | contribs)
Flash the Raspberry Pi with etcher.
On the SD Card in the root directory of the boot partition, create an empty file called **ssh** or **ssh.txt**
On the SD Card in the etc directory of the rootfs boot partition, open the dhcpcd.conf file with root permissions.
Add the following lines to the bottom of the file. (This example assumes your ip address is 192.168.1.2, and your gateway is 192.168.1.3.)
interface eth0
static ip_address=192.168.1.2/24
static routers=192.168.1.3
Log into the Pi via SSH and expand the filesystem with: raspi-config --expand-rootfs
